Labconco Purifier Axiom Type C1 Biosafety Cabinets

The Labconco Purifier® Axiom® Class II Type C1 Biosafety Cabinets maximize safety and flexibility as the first biosafety cabinet that can be used in a recirculating Type A mode for standard microbiological work or can be connected to an exhaust system to function in Type B mode for handling hazardous chemicals. The unique design includes the Chem-Zone™, providing chemical safety with a large, clearly defined area within the enclosure, bringing peace of mind when handling chemicals. Other features that make the Axiom safe and easy to operate include Inclination™ Technology and the intuitive MyLogic™ Operating System.

Axiom Type C1 BSCs provide personnel, product, and environmental protection by filtering hazardous particulates and aerosols and are suitable for work in all biosafety levels. These biosafety cabinets discharge HEPA filtered exhaust air directly back to the laboratory, or into an exhaust system through an included connection. Axiom models are available with base stands and/or an Accessory Package (UV light, service fixtures(s) and Vacu-Pass™ Cord and Cable Portal) included.

Models conform and/or are listed to the following standards:

• NSF/ANSI Standard 49 Listed
• UL Standard 61010-1
• CAN/CSA 22.2 No. 61010-1
• CE Conformity Marking (230V models)
• ISO 5 conditions per ISO 14644-1 and 2
• ADA-complaint operation

Required Accessory (not included): Supporting base if unassembled stand option is not selected

All Models Feature

• Omni-Flex™ two mode design (Type A or B mode) and two programmable working sash heights (8” and 10”)
• Intrinsically safe negative pressure design
• Fully scannable 99.99+% supply and exhaust HEPA filters (99.999% ULPA filters available)
• Dual Electronically Commutated Motors (ECM)
• Constant Airflow Profile™ (CAP) Technology airflow monitoring system
• Active Protection Protocol that operates the cabinet’s exhaust blowers for up to five minutes, in the event of exhaust system failure, preventing the flow of air into the laboratory
• Low static pressure and volumetric rate exhaust requirements when in Type B mode. No dedicated exhaust system per BSC required
• Air-Wave™ Entry System at access opening to enhance containment
• Contain-Air™ Negative Pressure Channel at top of sash to enhance containment
• MyLogic™ Operating System and interior-mounted, line-of-sight, full color, easy-to-understand LCD information center with:
  • Smart-Start™ System for start up and shut down operations
  • Night-Smart™ System for idling the blower when the sash is fully closed (while in Type A mode only)
  • “Filter Life Remaining” bar graph for each HEPA filter
  • Status line for alarm conditions and alerts to warn when filter life diminishes to 20% and 0%
• Bright, 90-150 footcandle, glare-free LED lighting located outside the contaminated work area
• Interval/elapse timer for experiment monitoring, LED light or UV light control (on models with UV light)
• Electronic security lock (optional activation) that requires access code to operate the cabinet
• Two electrical duplex receptacles with flush-mounted stainless steel soft-close covers. Single outlets on 230V models one on each side (GFCI on 115V models only)
• 10° angled fully-closing. ¼” tempered safety glass sash with counterbalanced, anti-racking, easy-to-lift mechanism
• Curved waterfall design stainless steel inlet grille with Reserve-Air™ Secondary Airflow Slots
• Leak-tight stainless steel interior. Powder-coated steel exterior
• 6” (58cm) maximum sash opening height and 27.0” (69cm) viewing height
• Chem-Zone™ work surface with dedicated direct exhaust for use with hazardous vapors or radionuclides
• Removeable, type 304 stainless steel 3-piece work surface (dished Chem-Zone in center and two flat sides) with lift out knobs and clearly delineated working area (when handling chemicals)
• Touchpad on right -hand side post controls blower, light(s), timer, electrical receptacles, audible alarm mute and menu selection
• Five-Year Warranty
• Nominal inflow velocity of 105 feet per minute (fpm) (0.53m/sec)
• Nominal downflow velocity of 65fpm (0.33 m/sec) for 4’ models and 55 fpm (0.28 m/sec) for 6’ models

Options Include:

• Unassembled, NSF-Approved, powder-coated steel non-welded telescoping base stand with feet
• Accessory Package: UV lamp (254nm), service fixture(s) with ball-type valves(s) and Vacu-Pass™ Cord & Cable Portal
• 10” diameter stainless steel manual damper for Type B mode
• Bag-In/Bag-Out Package: Exhaust Filter for use with radionuclides or harmful chemicals