QualiTru 12-channel Septa
Each QualiTru septum is made of high-quality, food-grade materials with visible indication for used and unused channels for sample extraction. Once all channels have been used, simply replace with a new septum.
Your samples are only as reliable as your sampling procedure
Sampling plans often fail because they are a pain to carry out. Here is how the QualiTru Aseptic Sampling System integrates seamlessly into your SOP in 3 steps.
Step 1. Install stainless steel ports.
A good sampling point would be at the back of your receiver jar through a TruStream Sanitary Port to draw representative samples at any point throughout your process.
- 🗹 Diagnostic function
- 🗹 System quality check
- 🗹 CIP cleanliness check
- 🗹 Overall liquid quality control
Step 2. Secure a sterile septum into the port
When not in use, protect septa with a fitted dust cap from environmental contamination.
The Better Way to Sample
The QualiTru Aseptic Sampling System:
- 🗹 Closed septic system - no cross contamination
- 🗹 Single-use channel - no false positives
- 🗹 Draw large samples at very low cost
- 🗹 Flexible sampling volume
Traditional Sampling Methods:
- ☒ Open Valves: High risk of contamination, difficult to collect representative samples
- ☒ Steam in place Valves: Additional cost and labor for sterilization, product waste from flushing, risk of sample contamination.
- ☒ Micro ports: High risk of sample contamination, extra cleaning out of place step
Step 3. Collect samples via a single-use channel into sterile collection syringes or collection bags.
The sterile septa perform aseptically, which means that before, during, and after sampling, external contaminants would not come in contact with the process vessel or to the sample itself.
- 🗹 No sterilization needed between sampling.
- 🗹 Collect perfectly representative samples via constant flow connector port.
- 🗹 No false positives: effective diagnostics and microbial detection.
Description/Item No. | Details | PSI Stability | Temp# Stability | Type Rubber | Your Cost/Qty | Purchase | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
QualiTru Aseptic Transfer System
3064-80
|
12 port injection membrane, sterile, ind. wrapped | 150 psi/ 200 hours | 190°F. | standard EPDM |
|
|||||||
QualiTru Aseptic Transfer System
3064-81
|
Dust cover for 12 port sampling membrane |
$2.03/EA
|
||||||||||
QualiTru Aseptic Transfer System
3064-82
|
12 port injection membrane, sterile, ind. wrapped | 150 psi/ 200 hours | 280°F. | silicone |
$24.57/EA
|
|||||||
QualiTru Aseptic Transfer System
3064-83
|
Injection channel tank filling |
$730.99/EA
|
||||||||||
QualiTru Aseptic Transfer System
3064-91
|
End cap, 2", 304SS |
$684.86/EA
|
||||||||||
QualiTru Aseptic Transfer System
3064-93
|
End Cap, 2 1/2", 304SS |
$910.96/EA
|
||||||||||
QualiTru Aseptic Transfer System
3064-95
|
End cap, 3", 304SS |
$395.65/EA
|